Solution Description

                High High quality Aluminum Stainless Metal Camlock coupling 

Solution element :
 

Male Adapter x Male

Stainless Metal camlock hose fittings(Engates Rapidos, Manager coupling) specifications:
Regular of our SS cam and groove coupling:
>Our camlock coupling are produced to regular of A - A-59326(previously called MIL-C-27487)or DIN 2828.DIN2817
Casting strategy of our SS camlock coupling:
>Investment casting
Entire body materials of our SS kamlock fitting:
>CF8M casting (SS316)
>CFM casting (SS304)
>Other materials are accessible on ask for
Specification of our SS camlock coupling:
>Sizes obtainable:from 1/2" to 6"
one/2"    3/4"   1"   1-1/4"   1-1/2"   2"   2-1/2"   3"   4"   5"    6"   8"
>Types obtainable:A.B.C.D.E.F.DC.DP
Cam levers of our SS camlock fitting:         
>stainless steel.
Pins.Rings and Basic safety clips of our SS kamlock:
>We use steel plated Pins,Rings and Security clips.
(Notice:Protection clips are only obtainable when required by the shopper,the shopper have to spend further if need securely clips)
Sealings of our acoples rapidos kamlock en acero inxidable:
>NBR
>EPDM
>PTFE envelop gasket
Other materials are offered on ask for.
Threads of our racores camlock en acero inxidable:                                
>NPT
>BSP(We normally make the woman thread parallel BSPP.male thread tapered BSPT)

Packing & Delivery                                

Carton and picket circumstance

Firm Data                                                       

 

Growing RUBBER, as a specialist company and exporter with knowledge of ten years, delivers a broad selection of Hydraulic Hose, various PVC Hoses, Air Hose, Gas Hose, Suction & Discharge Hose, Sand Blasting Hose, Fittings and relative products to fit different types of purposes.

Developed in compliance with intercontinental top quality specifications (SAE, DIN, ISO), our range of goods is an result of persistent endeavors to attain maximum shopper fulfillment.

Our hydraulic hose generation strains include Large-Speed and Substantial-TECH bunching devices, braiding devices, and LIQUID NITROGEN COOLING System, which encourages our ability to a hundred and fifty 000 meters for every month and top quality significantly forward of rivals. A thorough laboratory delivers inspection masking all creation process from uncooked materials, semifinished, to finished items and long lasting to top quality tracibility technique soon after sale.

Right now, we have a distinguished consumer list in the development, mining & earthmoving industries. With stringent high quality manage system and annual creation capacity of 4 million meters, our products are also CZPT overseas shores by way of marketplaces in the Europe, North The usa, East Asia and other regions.

We believe our accomplishment is tied straight to the lucrative progress and fulfillment of our clients. So if intrigued, do not hesitate to contact us.

Relevant Item                                                               

We have total sequence of SAE and EN normal, including:

Wire braided: SAE R1/DIN EN 1SN, SAE R2/DIN EN 2SN, SAE R16, SAE R17
Wire spiral: SAE R9, R12, R13, DIN EN 4SP, DIN EN 4SH
Textile braided: SAE R3, SAE R6, SAE 5

INDUSTRIAL HOSE
Air hose--WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. 50-100M for each roll.
H2o hose--WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. fifty-100M for every roll.
Suction hose--H2o suction hose, drinking water discharge hose, oil suction hose, oil discharge hose.
Sand blast hose--Higher abrasion resistant tube.
Welding hose--Oxygen hose, Acetylene hose, Twin hose

PVC HOSE
PVC Steel Bolstered Hose--for h2o suction and conveying.
PVC Fiber Strengthened Hose--For foodstuff quality liquid.
PVC Helix Suction Hose--plastic spiral bolstered.
PVC Backyard Hose--for residence and agriculture utilization.
PVC Layflat Hose--agriculture irrigation and business watering.

HOSE FITTINGS
HOSE PROTECTOR
SILICONE HOSE
RADIATOR HOSE

If any want or questions, pls do not be reluctant to speak to me.

It's a lot more than satisfied to be on your service. 

 

FAQ ( Usually Questioned Question)                                         

one. Is sample available? 

Free of charge samples. 

two. How extended will I get my get?

Basic creation time for 1x20 feet container is ten-15 days, for 1x40 toes container twenty-twenty five days. 

three. How will my purchase be packed? 

All hose is packed by 2 plies of PVC film, interior is tranparent, outer is color and thick 1. (Colour can be purchased as customer like). Specific packing like Reel and Pallet also offered. Fitting is packed by 3 plies, carton, PVC bag and then pallet. 

4. What must I do if I discover good quality problem in making use of?

twelve months Quality Garentee for all of our merchandise. We offer you substitute for any defective induced by non-human causes.

five. Is it achievable to go to your manufacturing unit?

We warmly welcome you to pay a visit to our manufacturing facility at any of your handy time.

HangZhou Increasing RUBBER CO.,LTD 
Tackle: Room 718, No. 658 HangZhou Street, E&T dvp zone, HangZhou, China

If you have any passions on our merchandise, remember to speak to us.

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you're unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc's splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc's splines and teeth. This stabilizing element is positioned axially over the disc's width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They're a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.