The EP Greenhouse gearbox is a concise and lightweight reduction gear driver with an integrated limit switch system that is suitable for assembly of a locally available electric engine. The geared motor can be used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor can be rainproof and windproof. The reducer includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the reduction geared motor is not running. The fully sealed reduction gear motor has an expansion chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all circumstances, even at high temperatures. Thanks to the utilization of an expansion chamber, the geared motor can be installed in any placement. There are no restrictions, because there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the gearbox in optimum condition for its entire operating life time. The gear motor is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gearbox has an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an integrated chamber and can be enclosed by an impact-resistant plastic-type cover. The limit change system is accessible and simple to adjust. The limit change system's optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8"x3/8".
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).