Single and dual reduction planetary equipment drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high quickness, low torque sources to provide decreased speeds at increased torques. The input part has standard SAE pads for engine mounting. Available in the three output configurations proven below. Many units could be furnished with an integral parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input swiftness is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output part has hub for mounting vehicle wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the greatest in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of hydraulic planetary drive essential pinion gears.