What's pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to another where limited mis alignment might occur and to absorb shock loads.
We are one of the prominent corporations engaged in providing Pinbush Coupling that has highly developed rubber compounds for use in bushes to soak up shock, tensional vibrations and slight misalignments. These couplings are flexible in type and tend to be of the cushioned drive type that is utilized for transmitting the torque through optimum tensile steel bolts to the device input. Moreover, they are simple and compact in construction that makes these with the capacity of transmitting large torques at optimum speeds. These types of couplings generally permit travel in either direction and require neither lubrication, nor adjustment after fitting.

Pin and Bush Couplings
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion spring properties because of primarily pressurised bushings
Fail-safe in case of the failure of the bushings
Easy replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity in accordance with ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
General mechanical engineering

Ever-electric power pin and bush coupling
Ever-power couplings contain a couple of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes let the MISALIGNMENT IN ALL DIRECTIONS and give extra torsional flexibility when compared with plain bushes.
These couplings are suited to standard engineering application requiring reliable power transmission even underneath conditions of shaft misalignments which are often unavoidable.

Ever-power couplings are being used because flexible compensating couplings in all applications requiring a trusted transmitting of torque under harsh operating circumstances. The conical seats of the buffer pins facilitate mounting and guarantee maintenance-free operation. The optimized shape of the barrelled buffers allows simple plug-in assembly and low circumferential backlash. Various type variants are offered, electronic. g. with brake disk, axial play limiting device, or brake electric motor couplings.
To the top of the page
Examples of application
Ever-power couplings are used generally mechanical engineering both as high-acceleration couplings and for large torques, e. g. in
Screw pumps
Cement processing machines7
To the most notable of the page
Advantages of the product
Flexible fail-safe pin and bush coupling for medium up to high torques
Compact style; low weights and mass moments of inertia
Independent of direction of rotation (suitable for reversing operation)
Ideal for plug-in assembly (blind assembly, bell housing installation)
Torque range of the standard series between 200 Nm and 1,300,000 Nm
Can be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)

Pin & Bush Couplings
Simple and nearly indestructible, the pin and bush design is suitable for applications that involve safety, such as elevator drives or perhaps fire pumps. The fail-safe aspect of the design permits the coupling to be serviced at practical intervals, should the elastomer become damaged.
The elastomer elements reduce vibration and dampen impact loads, and also accommodate misalignment up to 0.5 degrees. The initial bushing is definitely a neoprene elastomer with a graphite impregnated bronze sleeve. They are still available, as well as a contemporary version of the concept: urethane bushings.

Ever-vitality also manufactures many customized variations of this coupling including brake drum and shear pin type couplings.
Damping shaft coupling that can be used universally to compensate for shaft misalignment
Nominal torque range between TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C

Robust and tested a million times
Due to their torsional flexibility, Ever-power couplings can move critical torsional vibrations from the operating spot of mechanical equipment in such a way that no unwanted effects on the drive train should be expected. Ever-ability couplings are made from high-top quality cast iron. The versatile elements manufactured from synthetic rubber (Buna-N) can be found in different examples of hardness for many applications. Metallic pins and flexible factors are designed so that no put on occurs when they are properly fitted.

Your benefits instantly
Fail-safe for optimum operational reliability
Three-part type ideal for plug-in assembly and simplified replacing of elements
Choice of elastomer hardness to suit various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of availability of parts ex stock

Established as an commercial standard, worldwide used
Mining and Cement: heating system technology
Coal and oil: pumps, fans, compressors, weather condensers
Power Generation: pumps, admirers, compressors, air condensers, drinking water turbines
Chemical substances and Pharmaceuticals: driers, lauter tuns, pumps, enthusiasts, compressors, mixers, agitators, reactors
Plastic and Rubber: single- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Meals and Beverage: lauter tuns, reactors, agitators, mixers

Did you know?
Original Ever-power elastomers ensure the optimal operation of your system. The flexible components of the Ever-electrical power coupling are at the mercy of compression. If the flexible elements are irreparably broken, the hub parts touch metal. This “emergency operation capability” is necessary, e.g., in the case of fire pump drives.