We are committed to research and creation of goods that meet up with the increasingly sophisticated electronics industry and are widely used in computers, kitchen appliances, consumer electronics, communications, info, industry, medical and other fields.
We also has patent for 360 degree AC PIN interchangeable type adaptor in fact it is leading the world’s exceptional design.

Ever-Power provides items which are small, lighter, more electrical power efficient, and much easier to use.
We selling products all over the world and acquire the certifications for each and every of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters mount between the vehicle tranny and power take-off, and may serve several purposes. Most commonly, adapters are utilized to improve the way of rotation of the PTO outcome shaft. They can also be utilized to space the PTO out and away from the transmission case. On some imported or non-SAE normal transmissions they allow for the mounting of standard 6-bolt electricity take-offs. Gear Adapters can be found to fit most popular transmissions.
Numerous body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Improvements PTO shaft rotation: Complements PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Matches SAE standard PTOs to non-standard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (makes 20 to 40 HP from the power take off)
• No need to modify electricity take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and toned faced couplers
• Ideal for three point electrical power take off apparatus – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches give a safe means to protect operators and pricey machinery from situations when the inertia of PTO driven implement exceeds and over-runs the tractor PTO rate. When this happens, the over-running coupler will free-wheel
smoothly and safely. Over-operating clutches will normally tolerate applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Excessive shock loads or drive line angularity will certainly reduce this capability
If the distance of your PTO does not fit perfectly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall Pto Adapter china amount of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional size on the end of your PTO. This tractor PTO shaft adapter features both a female 6 spline end and a male 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection alternatives and is suitable for anyone that owns a mature tractor since the older parts might not be produced any longer and are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run generating source. The coupler drives solidly from tractor to put into practice and free wheels smoothly when implement exceeds tractor PTO speeds. All sizes are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Expected with 1000 RPM gearcase upgrade or 3 Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect match for your Shop Dog. It could be easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is ranked for tractors up to 70 HP.