The original sheave and pulley mounting system developed to facilitate installation and replacement of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and invert (flange inboard) mounting configurations.
1. Be certain the tapered cone surfaces of the bushing and the within of the driven product are clean and free of anti-seize lubricants.
2. Slide QD bushing on shaft, flange end initial. Assemble key.
3. Position QD bushing on shaft. Tighten arranged screw over key “hand tight” with regular Allen wrench only. Usually do not use excessive force.
4. Slide large end of sheave or sprocket taper bore into placement over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub so that both extra holes in the hub are located as far as feasible from the bushing’s noticed cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Usually do not use extensions on wrench handles. There must be a gap between the encounter of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone grasp and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings include a completely split style to greatly help provide easy set up and disassembly. A tapered bushing with directly edges uses an internal screw to help drive the bushing into the shaft, while a split taper has a flange and an integral on the bushing to help provide more drive.
QD bushings (in . and metric sizes) possess a flanged style and show a 4° taper with conventional or reverse installation. They are stocked in popular completed bore sizes and minimal plain bore for customized reboring.
Many people make reference to both types as a “taper lock” because they both qd bushing china utilize the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, runs on the set screw to operate a vehicle the bushing into the bore of the component getting set up (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal just. Also be aware that the appearance of a flange externally of the bushing doesn’t necessarily mean it’s a QD design. Split Taper bushing also has a flange, and both are not interchangeable. The QD design includes a split that proceeds through the flange. The Metal QD (Quick Disconnect) Type bushing offers versatile and easy installation while providing exceptional keeping power. QD Bushings are used thought out the industry offering convenience and design versatility. They are precision machined of quality Metal and are set up by tightening several cap screws. This draws the bushing into the taper bore of the product which compresses the bore of the bushing. QD bushings are often removed utilizing the cap screws as jack-screws. Double drilled holes are furnished in QD Bushings permitting mounting of product in the traditional or reverse positions. This enables cap screws to become installed through product hub or bushing flange whichever is certainly most convenient. A significant benefit in installation, cap screws are at all times inserted from the outside where they are often accessible. QD Bushings can be found from share with all popular bores within the number of every size bushing.
QD Bushings include a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping force is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are essential for installation v-belt drives, synchronous belt drives and roller chain drives.

Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the right time at the proper price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered materials with great tolerance. The feature is easy to use and needs no extra alteration. These bushings can fit almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: full range of both metric and imperial obtainable.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range offered, for compact light-weight assemblies & Clean, Compact Style.
Ease of installation and removal.
The original sheave and pulley mounting system developed to facilitate installation and substitute of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and invert (flange inboard) installation configurations.
1. Be sure the tapered cone surfaces of the bushing and the within of the driven product are clean and free of anti-seize lubricants.
2. Slide QD bushing on shaft, flange end 1st. Assemble key.
3. Position QD bushing on shaft. Tighten set screw over key “hand tight” with regular Allen wrench only. Usually do not use excessive force.
4. Slide large end of sheave or sprocket taper bore into placement over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub so that both extra holes in the hub are located as far as feasible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Do not use extensions on wrench handles. There should be a gap between your face of the sheave or sprocket hub and the flange of the QD bushing to insure a reasonable cone hold and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmitting applications. Flanged quick-disconnect bushings feature a completely split design to greatly help provide easy set up and disassembly. A tapered bushing with directly edges uses an internal screw to help drive the bushing in to the shaft, while a split taper includes a flange and a key on the bushing to greatly help provide more drive.
QD bushings (” and metric sizes) have a flanged style and feature a 4° taper with standard or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
Many people refer to both types as a “taper lock” because they both utilize the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, uses a set screw to drive the bushing in to the bore of the component becoming installed (sheave, sprocket, etc.). Be careful when setting up these screws. The holes with threads on the bushing are for removal only. Also remember that the looks of a flange externally of the bushing doesn’t necessarily mean it’s a QD design. Split Taper bushing also has a flange, and the two aren’t interchangeable. The QD design has a split that continues through the flange. The Steel QD (Quick Disconnect) Type bushing offers flexible and easy set up while providing exceptional keeping power. QD Bushings are used considered the industry offering convenience and design versatility. They are precision machined of quality Steel and are installed by tightening many cap screws. This draws the bushing into the taper bore of the product which compresses the bore of the bushing. QD bushings are easily removed utilizing the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting mounting of product in the traditional or invert positions. This allows cap screws to end up being installed through product hub or bushing flange whichever is definitely most convenient. A substantial benefit in set up, cap screws are at all times inserted from the outside where they are often accessible. QD Bushings are available from share with all popular bores within the number of every size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping force is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for installation v-belt drives, synchronous belt drives and roller chain drives.