one.A connecting link of an O-ring Chain for basic application is pre-coated with grease at the pins. Ahead of connection, verify the grease within the surfaces of pins, and if the amount of grease is compact, apply grease with bare hands. (If gloves are utilized, the grease will probably be absorbed through the gloves.)
Example: Once the connecting website link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots of your pins. When the O-rings come loose on account of vibration for the duration of transport, refit the O-rings in to your roots of the pins.
In this instance, make sure you return the grease collected with the roots of the pins for the central surfaces of your pins, additional at portion A than at portions B proven within the above illustration. (Portions A is worn due to sliding using the bushings.)
2.The chain can be most easily connected to the teeth of the sprocket. Engage the back links at both ends in the chain using the sprocket teeth and fit connecting pins. If your sprocket can be moved, the chain may also be linked around the loosened side.
3. Connecting process
1.Confirm that O-rings are connected on the roots of the pins.
2.When the volume of grease applied over the connecting pins is compact, coat the pins with grease in the central portions.
3.Insert the connecting pins in to the bushings of the inner links at the two ends.
4.Confirm that the grease is utilized for the entire face of your O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and whilst pressing the connecting plate, set up the spring clip. Verify no matter if the head (the finish without a split) from the spring clip is turned from the feeding course in the chain. (See the next illustration.)
six.Be sure to verify the spring clip is securely fitted from the clip grooves with the connecting pins.
This completes jointing on the connecting website link. Note that grease around the surfaces of connecting pins and O-rings may be removed during installation function. In this instance, re-grease working with the grease to the surface on the base chain or the grease within the polyethylene bag in which the connecting website link was contained.