Single and dual reduction planetary gear drives to be utilized with electric, hydraulic, air motors or mechanical power input from high quickness, low torque sources to deliver reduced speeds at increased torques. The input side has regular SAE pads for engine mounting. Available in the three Plastic Gear Rack Output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for mounting automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The "SW" Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and heat treated ring equipment to minimize backlash growth due to wear. The external bearing nut supplies the supreme in shaft retention and shaft strength. Output can be a spindle shaft or various sizes of essential pinion gears.