Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is normally detached as observed in the photos. (electric fan motor china Discover “Control Notice” below for alter type.)
T (See “Software Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we've demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several motor at a time, we will do our better to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan program. This is a completely enclosed fan electric motor and designed to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electrical motor will overheat and get into automatic thermal overload if run in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automated thermal overload. (Your lover blade from another manufacturer may have a steeper blade position.)
Origin: This electric motor is produced in China.