Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the force of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J have a bracket on underneath for tying off 1 end of a rope.
Style K decrease the force needed to keep your load set up. Unlike regular pulleys, these have a V-groove for more grasp on your rope, plus they ratchet when under load so they won't slip in the other direction. Pulley for3/8" dia. rope can be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Aluminium and nylon are light-weight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal and light weight aluminum are lightweight and corrosion resistant. Galvanized steel is definitely more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it's easier to feed the rope through the housing-a totally free rope end isn't needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Aluminum is more lightweight than stainless steel. Stainless can be more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys meant for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to go the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum is definitely corrosion resistant. Stainless may be the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang in your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open therefore it’s easier to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems.They are able to reduce the force had a need to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about 50 % the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style E pulleys have bracket upon the bottom that lets you tie off one end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it'seasier to feed the rope through the housing-a totally free rope end isn't needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the power of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as for example block and tackle systems. They are able to reduce the force had a need to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Style A pulleys have a bracket on the bottom for tying off 1 end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it's easier to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never make use of to lift people or products over people.