DUMP TRAILER Power UNIT-DOUBLE ACTING
General Description
This energy unit has a energy up power down circuit with load holding on each A & B ports. A stress compensatred movement management can be additional to circuit to regulate the decent pace with the cylinder.
Unique Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned in advance of set up of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities. N46 hydraulic oil is recommended.
4. The energy unit must be mounted horizontally.
5. Check the oil level inside the tank following the preliminary running on the power unit.
six. Oil shifting is required following the first one hundred operation hours, afterwards when every single 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
General Description
This power unit features a electrical power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve might be provided if necessary. Also a stress compen sated flow manage may be additional for the circuit to manage the descent pace with the cylinder.
Remark: Please talk to our income engineer for the distinct pump displacement, motor energy or tank capability.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities.N46 hydraulic oil is advisable.
four. The energy unit ought to be mounted horizontally.
5. Check the oil degree inside the tank following the first operating on the energy unit.
six. Oil modifying is required immediately after the first one hundred operation hrs, afterwards after each and every 3000 hrs.